KSh28,509

Take care of your Ultimaker 2+ and Ultimaker 2 Extended+ with confidence. This all-in-one solution contains a built plate, 10x cleaning filaments, 2x Bowden tubes, and all the other parts you need to make routine maintenance easy.

 

The Maintenance Kit contains the following items:

    • PT100 B Sensor Glass Fiber
    • TFM 2x
    • Fan Pack
    • Bowden Tube Pack
    • Olsson Nozzle 0.4
    • Hot End Isolator
    • Glass Plate
    • Build Platform Glass Retainer Back (2x)
    • Calibration Card
    • Magnalube / Grease
    • Heater Cartridge 24V 35W
    • Injection Molding Part/Print Head Aid
    • Sewing Machine Oil

 

Maintenance Schedule

To keep your Ultimaker 2+ in optimal condition we recommend the following maintenance schedule, based on 1,500 printing hours per year:

Every month Every 3 months Every year
Clean printer Check for play on axles Clean feeders and replace Bowden tubes
Lubricate axles Check the tension of short belts
Check for residue in front fan of print head
Check quality of silicone nozzle cover
Clean print cores
Lubricate lead screw Z motor

 

Note: If the usage frequency is higher, we recommend performing more frequent maintenance on your machine to ensure optimal printing results.

SKU: SPU-MK-2PLUS Category: Tags: ,